|
|
|
|
This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material, and held in position with stainless steel clamps (sold separately). All exchangers are supplied with a zinc anode and a grounding lug.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Phone: 360-734-6860 Fax: 360-676-5957 e mail: admin@orcamarine.com
|
Compact-A exchangers are single pass on the shell side, 3 pass on the tube (raw
water) side. These exchangers have no expansion tank integrated into their
design, and rely instead on an external expansion tank or an overflow recovery
bottle to capture coolant
volumes which exceed system capacity in operation, and return them to the
cooling system when it cools down. Coolant is added to the system via a
separately mounted fill neck with pressure cap. The shell is completely packed with
tubing, providing the maximum heat transfer surface possible for each set of
external dimensions.