Home Contents Order Info Request

Reservoir
Reservoir Fill Necks Fittings Tune-Up Kits

 

Up

Our external expansion tanks and reservoirs are fabricated in copper, fitted with a 15# pressure cap and one or more hose connections.

This reservoir is illustrated without a mounting bracket.  We have mounting brackets for virtually any mounting configuration.  Reservoir is held in position with stainless steel clamps (not shown).

An overflow recovery bottle may be added to a system utilizing these tanks, by connecting to the fill neck tubing fitting provided. 

Illustrated here are vertically mounted reservoirs.  We also produce horizontal reservoirs with a variety of hose or threaded fittings.

 

Type Diameter A B C W X Capacity
              at 1/2 full
              (quarts)
671405 4-1/8 7-1/2 5 1-1/2 1-1/2 1-1/2 .5
671406 4-1/8 8-1/2 6 1-1/2 1-1/2 1-1/2 .6
671408 4-1/8 10-1/2 8 2 1-1/2 1-1/2 .9
671410 4-1/8 12-1/2 10 2 1-1/2 1-1/2 1.1
671508 5-1/8 10-1/2 8 2 1-1/2 1-1/2 1.4
671510 5-1/8 12-1/2 10 2 1-1/2 1-1/2 1.7
671512 5-1/8 14-1/2 12 2 1-1/2 1-1/2 2.0
671514 5-1/8 16-1/2 14 2 1-1/2 1-1/2 2.4
               
Reservoirs for High Point Fill Only

(single hose connection)
672405 4-1/8 7-1/2 5 N/A - 3/4 .5
672406 4-1/8 8-1/2 6 N/A - 3/4 .6
672408 4-1/8 10-1/2 8 N/A - 3/4 .9
672410 4-1/8 12-1/2 10 N/A - 3/4 1.1
672508 5-1/8 10-1/2 8 N/A - 3/4 1.4
672510 5-1/8 12-1/2 10 N/A - 3/4 1.7
672512 5-1/8 14-1/2 12 N/A - 3/4 2.0
672514 5-1/8 16-1/2 14 N/A - 3/4 2.4
Place an Order

 

Phone: 360-734-6860    Fax: 360-676-5957   e mail: admin@orcamarine.com  
Last modified: June 3, 2008.  Copyright © 2003, 2004, 2005, 2006, 2007, 2008 Trunek Enterprises, Inc.  All rights reserved.