Exchangers for cabin heating service are designed as single pass on both the shell and tube side to minimize pressure drop through the system.  Connections are set for ease of mounting on the deck or bulkhead.

No fill neck is mounted on the exchanger, as a separate fill neck (optionally with a reservoir) must be mounted in a 'high point' position to supply heating fluid to the circulating loop on the shell side.

This exchanger is illustrated without a mounting bracket.  We have mounting brackets for virtually any mounting configuration.  The exchanger is mounted on the bracket with cushioning material, and held in position with stainless steel clamps (not shown).  All exchangers are supplied with a grounding lug.  A zinc anode is not supplied, as it is not required for common heating fluids, but may be added if desired.

Place an Order

Phone: 360-734-6860    Fax: 360-676-5957   e mail: admin@orcamarine.com  
Last modified: June 3, 2008.  Copyright © 2003, 2004, 2005, 2006, 2007, 2008 Trunek Enterprises, Inc.  All rights reserved.