|
|
|
|
Orca Marine Cooling Systems
recently announced that it has introduced "Tune-Up" Kits for its
removable end cap heat exchangers. The kits consist of a set of gaskets,
end caps, stainless end bolts and washers, a new Zinc anode and a plastic
clean-out rod. This kit provides everything normally needed to clean and
restore the heat exchanger to its original integrity. Properly maintained, a quality
heat exchanger will provide many years of trouble-free service. Annual
inspection of the exchanger and replacement of the rubber gaskets is part of
that maintenance. Additionally, zincs will generally require more frequent replacement so installing a fresh zinc while doing an annual inspection is usually a good idea. Over time,
end caps will deform if over-tightened and could crack. Replacing the end
cap when you replace the gaskets insures that these components are in top
condition.
|
Phone: 360-734-6860 Fax: 360-676-5957 e mail: admin@orcamarine.com
|
